Nimac

Nimac Power Systems (M) Sdn Bhd

Product Category




UPS System

LUP & LUV Series True On Line Uninterruptible Power Systems

  • Input true galvanic isolation transformer
    Con Solve Ultimately the problem of power system, including leakage current, noise interference... etc. 
  • Per phase with individual inverter support 
    Characteristics will not be violated under 100% unbalance load.
  • DC start available 
    Can be started without AC power source.
  • 12 pulse full controlled rectifier (option) 
    Can reduce harmonic current.
  • Advanced battery management 
    Battery replacement warning prevents downtime.

Three Phase LUP Series Technology Specifications.

Model LUP-15 LUP-20 LUP-30 LUP-40 LUP-50 LUP-60 LUP-80 LUP-100
Capacity 15KVA 20KVA 30KVA 40KVA 50KVA 60KVA 80KVA 100KVA
Input (Rectifier) Voltage 3ø 380V/ 400V/ 415V ± 15% + N*
Frequency 50 or 60 Hz ± 5%
Power Walk-in 0 ~ 100% : 10 sec.
Output (inverter) Voltage 3ø 380V/ 400V/ 415V + N*
Frequency 50 or 60 Hz ± 0.5%
Static Regulation ± 1% at linear load
Dynamic Regulation = 2% at 50% load unbalance, = 5% at 100% load unbalance
THD Distortion = 3% at linear load, = 5% at Non-linear load
Transient Response < 5ms
Power Factor 0.8
Overload Capacity 100% continuous, 125% for 10 minutes, 150% for 1 minute
Battery Voltage 192V (12V x 16pcs) 348V (12V x 29pcs)
Maximum Charge 
Current
5A 10A
Float Voltage 216V 392V
Boost Voltage 230V 420V
Recharge Time 4~8 hours 90% after fully discharge
Static Switch Mains <> Inverter No break
Indicator LCD Display As left showing
LED Display Mimic display
Protection Output Short Yes
Lightning/EMI Filter Yes
Environment Temperature 0°C to 40°C
Humidity 0 to 90%, non condensing
Noise Level < 60dB at 1 meter < 65dB at 1 meter
Communication Interface Port RS-232 or AS-400 (standard), SNMP adaptor, RS-485 (option)
Dimension 
(WxHxD) (mm)
UPS 660 x 1550 x 800 660 x 1550 x 800 1100 x 1710 x 850
Battery Bank 660 x 1550 x 800 660 x 1550 x 800
Net Weight UPS 250kgs 300kgs 400kgs 500kgs 200kgs 250kgs 300kgs 450kgs
Battery Bank 430kgs 500kgs 630kgs 1100kgs

Single Phase LUV Series Technology Specifications.

Model LUV-50 LUV-60 LUV-80 LUV-100 LUV-150 LUV-200 LUV-300
Capacity 5KVA 6KVA 8KVA 10KVA 15KVA 20KVA 30KVA
Input (Rectifier) Voltage 110V or 220V ± 15%
Frequency 50 or 60 Hz ± 5%
Phase 1ø2W+G or 3ø3W+G, 3ø4W+G
Output (inverter) Voltage 115V or 208V, 230V
Phase 1ø2W+G or 1ø3W+G (option)
Voltage Regulation ± 1% at linear load
Frequency 50Hz or 60Hz ± 0.5%
Power Factor 0.8
Waveform Distortion Less than 3% at linear load
Crest Factor 3 : 1
Overload Capacity 100% continuous, 150% for 25 seconds
Efficiency AC to AC >85% at battery fully charge
Battery Voltage 192V (12V x 16pcs) 240V
Back up Time Computer load 15~30 min.
Recharge Time 4~8 hours 90% after fully discharge
Transfer Time Mains <> Inverter No break
Indicator LCD Display Input/Output voltage, Frequency, Output current percentage, 
Battery voltage, Operating temperature.
LED Display Mimic display
Audible Alarm Battery Discharge Sound every 4 seconds. Sound every 1 second for battery low.
UPS Fault Continuous sound
Protection Output Short Yes
Lightning Yes
Environment Temperature 0°C to 40°C
Humidity 0 to 90%, non condensing
Noise Level < 50dB at 1 meter < 60dB at 1 meter
Communication Interface Port RS-232 or AS-400
Dimension 
(WxHxD) (mm)
UPS 260 x 800 x 660 260 x 900 x 660 310 x 900 x 660 360 x 740 x 870
Battery Bank 360 x 740 x 870
Net Weight UPS 130kgs 160kgs 190kgs 320kgs 190kgs 230kgs 280kgs
Battery Bank 200kgs 200kgs 290kgs